Curtis TID5030 Uživatelský manuál

#TID5030 Caller ID Telephone instruction manual REVISED 12-07-04 Location of controls 1. Handset Volume Hi/Low Switch 2. Dialing Tone/P

4. Select the desired volume level using the Rotary Volume Control. 5. To turn the radio off adjust the Radio On/OFF/Auto switch to “off” RADIO SPE

ALARM OFF Slide the AUTO/OFF/ON switch to “OFF” position if you wish to turn off the radio or buzzer after the radio or buzzer has sounded in the Wak

humidity to ensure good performance and a long life-time .It should not be placed in bathing areas, or around stoves and radiators, etc. Always leave

IN CASE OF DIFFICULTY PROBLEM SOLUTION 1.No dial tone or phone will not dial out. 1. Check cords: Are they inserted properly and securely? A

Switch to Pulse position. Or; 2. Contact your phone company to have your line changed to tone and pulse service 7.Clicking sound or flutter when

Features Built-in FSK/DTMF decoder Clock alarm Pulse/Tone switch Compatible with all CID standards (FSK/DTMF) such as Bell 202,U23,BT,CCA,ETSI et

Choosing a location For best radio performance, be sure to install the unit at least 4 feet away from cordless telephones, microware ovens, and operat

Wall mounting the telephone. The unit may be wall mounted either on a telephone wall plate or with two screws (not included). If using screws, insert

AM & PM indicator). z Four times- To enter volume setting.(Note: This function is invalid in this unit ) z Five times- To enter ring tone

TONE/PULSE (T/P) SWITCH 1. Set the Tone/Pulse Switch on the side of the handset to TONE position if Tone dialing is offered in your area. If you are

2. To answer the call, pick up the handset and begin to speak. After several seconds the call timer will begin keeping track of the elapsed time for

1. Pick up the handset. 2. Press the [AUTO] key, and then press the digital key (1-0) where the number was stored. 3. The number is dialed automati

IMPORTANT: All messages will be deleted when battery is removed.. RADIO OPERATION INSTRUCTION z AM/FM band selector … Slide this selector to ei